HERTZ by Elettromedia

Share this page:

HP 6001

D-CLASS MONO AMPLIFIER WITH CROSSOVER

HP 6001 è l’amplificatore più potente della linea SPL Show. Stadio di alimentazione sovradimensionato e stadio finale in classe D con 12 Mosfet assicurano un’erogazione di potenza fino a 6000W.
Le ampie possibilità di configurazione, con filtro Lo-Pass a 24dB escludibile, filtro Subsonico, controllo di fase variabile e controllo remoto del volume, rendono HP 6001 un finale per SPL estremamente potente e completo.
Utilizzando la funzione Chain Mode, per collegare insieme due amplificatori, è possibile ottenere la potenza devastante di 12000W con valori SPL da primato.

read more

Accessories

HRC

Sub Volume Remote Control

Sub Volume Remote Control (HRC) allows the user to adjust subwoofer level from dashboard.

Data table

Channel mode 1
Output Power (RMS)
@ 14.4 VDC
1 Ch: 1670 W x 1 (4 Ω)

1 Ch: 2970 W x 1 (2 Ω)

1 Ch: 5000 W x 1 (1 Ω)
Filters


Lo-Pass





50 ÷ 400 Hz @ 24 dB/Oct.


Distortion - THD
(100Hz @ 4Ω)
0.1 %
S/N Ratio
(A weighted @ 1V)
86 dB
Damping factor
(100Hz @ 4Ω)
500
Size W x D x H
mm (in.)
644 x 280 x 65,5 (25.35 x 11.02 x 2.55)

Input / Output

Technologies

  • OVERBUILT POWER SUPPLY STAGE

    In order to deliver such extraordinarily high power and to transfer it uninterruptedly, the power supply stage features multiple toroidal transformers, 105° Low ESR primary capacitors, TO247 Mosfets and large tank-type secondary capacitors.
  • CIRCUIT BOARDS AND COMPONENT DESIGNED SPECIFICALLY FOR SPL SYSTEMS

    Inside the amplifier, the electronics have been designed specifically for SPL systems, driving low impedance loads with perfect thermal stability. Power for sound pressure without compromise.
  • ULTRA-VERSATILE AND COMPLETE CONTROL AND FILTER SYSTEM

    The Front End section features a complete crossover system, for endless configuration possibilities. HP 3001/HP 6001 mono models are provided with by-passable Lo-Pass filter (24 dB/Oct. slope), subsonic filter, phase control, remote volume control (HRC) and also a Chain Mode function to cascade-connect a second amplifier, achieving maximum SPL levels.
  • ALUMINIUM EXTRUDED HEATSINK WITH MASSIVE FINS FOR UNPARALLELED THERMAL STABILITY

    Aluminium extruded heatsink with enhanced thermal performance. Following the style of Hertz, the Hertz logo has been tastefully integrated into the top of the HP heatsink, and massive fins are featured along the side of the amplifier.

Share this page:

Scroll to top