HERTZ by Elettromedia

Share this page:

HP 3001

D-CLASS MONO AMPLIFIER WITH CROSSOVER

HP 3001 è un amplificatore monofonico in classe D, che offre una potenza di 3600W, per il subwoofer, e assicura prestazioni “spaventose“ utilizzandone una coppia per i woofer anteriori (fino a 500 Hz).
Il design dei circuiti stampati, la componentistica dello stadio di uscita sono progettati per rispettare rigidi requisiti di affidabilità, potenza e dissipazione termica.
Le ampie possibilità di configurazione, con filtro Lo-Pass a 24dB escludibile, filtro Subsonico, controllo di fase variabile e controllo remoto del volume, permettono di configurare HP 3001 in diversi sistemi e, utilizzando la funzione Chain Mode per collegare insieme due amplificatori, ottenere una potenza di 7200W con valori SPL elevatissimi.

read more

Accessories

HRC

Sub Volume Remote Control

Sub Volume Control (HRC) allows the user to adjust subwoofer level from dashboard.

Data table

Channel mode 1
Output Power (RMS)
@ 14.4 VDC
1 Ch: 1200 W x 1 (4 Ω)

1 Ch: 2000 W x 1 (2 Ω)

1 Ch: 3000 W x 1 (1 Ω)
Filters

Hi-Pass





50 ÷ 400 Hz @ 24 dB/Oct.



Distortion - THD
(100Hz @ 4Ω)
0.1 %
S/N Ratio
(A weighted @ 1V)
96 dB
Damping factor
(100Hz @ 4Ω)
150
Size W x D x H
mm (in.)
544 x 240 x 65,5 (21.41 x 9.45 x 2.55)

Input / Output

Technologies

  • OVERBUILT SUPPLY STAGE

    In order to deliver such extraordinarily high power and to transfer it uninterruptedly, the power supply stage features multiple toroidal transformers, 105° Low ESR primary capacitors, TO247 Mosfets and large tank-type secondary capacitors.
  • CIRCUIT BOARDS AND COMPONENT DESIGNED SPECIFICALLY FOR SPL SYSTEMS

    Inside the amplifier, the electronics have been designed specifically for SPL systems, driving low impedance loads with perfect thermal stability. Power for sound pressure without compromise.
  • ULTRA-VERSATILE AND COMPLETE CONTROL AND FILTER SYSTEM

    The Front End section features a complete crossover system, for endless configuration possibilities. HP 3001/HP 6001 mono models are provided with by-passable Lo-Pass filter (24 dB/Oct. slope), subsonic filter, phase control, remote volume control (HRC) and also a Chain Mode function to cascade-connect a second amplifier, achieving maximum SPL levels.
  • ALUMINIUM EXTRUDED HEATSINK

    Aluminium extruded heatsink with enhanced thermal performance. Following the style of Hertz, the Hertz logo has been tastefully integrated into the top of the HP heatsink, and massive fins are featured along the side of the amplifier.

Share this page:

Scroll to top